ULTIMHEAT 2015 New products
Dia. 10 mm cartridge thermostat with ½" or M14x1.5 fitting, calibration from 50 to 120°C
Type 72
Detection of a temperature value in liquids, water, hydraulic oils, thermal oils. Two versions of electrical contacts: Gold-plated for low power circuit, like PLC or 2A 250V for relay coils or resistive circuits.

Main features
Probe material: 304 stainless steel sheath diameter 10mm, with AISI 304 fitting
Calibration temperature: 50 to 120°C(100 pcs MOQ applicable for specific values).
Tolerance on the opening temperature: ± 5°C
Fittings: 1/2 "BSPT (tapered) or M14x150 with gasket seat.
Immersed length (L1):Standard 90mm and 170mm (50, 230, 300mm on request)
Protection: IP65, IK10.
Pressure resistance: 25 bars.
Part sensitive to temperature: Located at the end of the sheath, on 35mm.
Contact: open by temperature rise. (Close on temperature rise possible on creep action models)
Electrical rating:
- PLC temperature alarm version: plated contact, creep action, 8A resistive in 12V/24V DC 60,000 cycles, differential less than 2°C.
- Thermal safety version: snap action silver contact, 2A, 250VAC, 100,000 cycles, differential higher than 10°C.
Cable outlet: 17x55mm PA66 overmolding.
Connection: H05VV F, 2 x 0.75 mm² cable, standard length 1m. (Connectors on cable end possible on request)
Main references with 1 meter cable (L2)

Other rod lengths, replace E090 or E170 by E followed by rod length in mm (MOQ apply).
Other cable lengths, replace H10 by H followed by cable length in dm (MOQ apply).
Download PDF
Access full catalogue

*ULTIMHEAT &reg is a registered trademark