Main applications
Cost saver solution for power control of high thermal inertia heating elements (thermal cycling device), used in professional and commercial premises, barns, stables, hen houses, poultry breeding.
Main features
Set point display: knob graduated from min to 8.
Min position provides about 5% of the power, and 8 about 100%, non-linear curve.
Zero position provides full disconnection of line and neutral.
Output: Cyclic open and close of an electrical contact with a cycle time of 20 to 30s for use high thermal inertia heating
elements or convection heating. Not to be used on low thermal inertia medium and long infrared emitters.
Electrical rating: 12A 250V
Enclosure: 120 x 70 x 65mm, rear in aluminum with cooling fins, front in black PA66.
Protection class: IP54
Mounting: Wall mounting, with 4 removable legs, 70 x 96mm distance
Internal Connection: 4 ways 6mm ?, ceramic terminal block. (2 power input terminals, 2 power output terminals ). 2 earth terminals.
Cables Input-Output: by 2 cable glands, M20, polyamide.
Residual voltage at off: 0V
Leakage current at off : 0 mA
Ambient temperature: -20 to +70°C
Insulation Voltage: 1500VAC
Insulation resistance: 50MΩ/500VDC
Important:
– Install this unit in a line with an appropriate circuit breaker.
– Not to be used for electric motor speed control
.svg)
.svg)