Main applications
These heavy-duty heaters, are designed for professional, commercial or industrial applications.
They are exceptionally sturdy and washable with hot water karcher.
They are equipped with a waterproof control box equipped with a multipole on-off switch, a pilot light, an adjustable control thermostat (mechanical or electronic), a safety limiter, and a tip over switch.
They are not designed for use in hazardous environments.
They exist with painted steel or stainless-steel body.
The main applications are heating of professional workshops, bungalows, cranes cabins, construction equipment, wagons or locomotives cockpit, technical rooms, ovens, containers, dryers, pharmaceutical and food laboratories, breeding premises, military equipment.
Main features
Dimensions: Heating section 600 × 130 × 150mm body (legs not included). Total length 690mm.
Protection: Ingress: IP69K, shocks: IK10.
Heaters: 3 or 6 finned elements in 304L stainless steel. Fins 25 × 50mm 304 stainless steel. Surface load 2W/cm².
Frame material: 0.8mm thick sheet, high strength (Withstands +100kg distributed load), two versions:
- Steel sheet with epoxy paint. Black is standard. Grey Ral 7035 available with MOQ 100p.
- 304 stainless steel sheet.
Controls: Located inside an epoxy painted aluminum enclosure, sealable.
It includes:
- One adjustable thermostat, mechanical or electronic, range 4 to 40°C.
- One fail safe high limit manual reset thermostat for protection against air outlet obstruction.
- One tip-over switch to protect against heater fail over.
Electrical connection: H05RR-F cable, length 2 meters, 3 × 1.5mm² (1750W single phase version), 3 × 2.5mm² (3500W single phase version) or 5 × 1.5mm² (3500W 3 phases version).
Voltage: Single phase 230V, 50/60Hz or 400V three phases with neutral .
Power: 1750W (3 heating elements) or 3500W (6 heating elements).
Mounting: 2 removable legs can be mounted under the frame (floor mounting) or on the side (wall mounting).
Ambient temperature: -20 to +60°C.
Net weight: 8.3 kg.
.svg)
.svg)