Applications
Ambient temperature control in professional premises where good protection against liquid splashes or dust isrequested.
Output with 2 cable glands, allowing of heat tracing cables for freeze protection.
The connection of one heating cable can be done directly. For the connection of several heating cables, it is necessary to go through an intermediate box of types Y25, Y26, Y28, Y29 (See pages of these products).
Main features
Housing: Reduced height, IP44, black PC-ABS fiberglass reinforced, UL94V0. High impact and UV resistance. 2 removable wall mounting lugs.
Cable input: Two M20 cable glands. Mounting of cable glands can be modified in 3 positions. Special cable glands for oblong heat tracing cables are available on request. Available models are described on pages of 6YTP products.
Set point adjustment: By °C printed knob for external adjustment models, by screw driver and printed dial on internal adjustment models. °F values available as an option.
Sensing element: Liquid filled “pigtail” bulb, mounted on the side of plastic housing.
Adjustment ranges: 4-40°C (40-105°F).
Electrical connections: On screw terminals. (It is possible to connect 2 wires 1.5mm² on each terminal).
Mounting: Wall mounting, by two side lugs with holes for dia. 4mm screws, 69 mm distance.
This thermostat can be mounted directly on the rear side of pipe mounting connection boxes type Y29.
Contact: SPNC (open on temperature rise).
Pilot light: Neon, 230V, standard in red, parallel connection on the load
Electrical rating, resistive loads: 16A 250V, 50 ~60Hz.
Minimum storage temperature: -35°C (-30°F)
Maximum ambient temperature: 60°C (140°F)
.svg)
.svg)