Junction or distribution box with cage terminal block.
Din rail mounting
Black opaque lid. The rail, with a clear width of 80mm (100mm for terminal blocks located less than 50mm above the rail), allows the mounting of:
• 18 × 1.5mm² cage junction blocks (4.2mm width without separation, 5.7mm with separation)
• 18 × 2.5 or 4.0mm² cage junction blocks (6.2mm width without separation, 7.7mm with separation)
• 9 × 6.0mm² cage junction blocks (8.0mm width without separation, 9.5mm with separation)
• 7 × 2.5 or 10mm² cage junction blocks (10.2mm width without separation, 11.7mm with separation)
• 2 × PGM25
• Din rail omega
• 2 M20 × 1.5 rear outlets sealed with M20 × 1.5 caps and gaskets
• 4 wall mounting movable brackets
• 10 red plastic seals
Box with terminal block
Can be used as a junction or distribution box or for customer control system integration.
• Ultimheat terminal block 5 × 6mm² and 5 × 2.5mm² symmetric
• 2 × PGM25
• 2 M20 × 1.5 rear outlets sealed with M20 × 1.5 caps and gaskets
• 4 wall mounting movable brackets
• 10 red plastic seals
Single phase junction box, 3 pre-wired outputs
Wiring: power supply Neutral + Phase + Ground on a 6mm² terminal block, and outlets to 3 heating circuit outlets 1.5 or 2.5mm².
Indicator lights: A power supply red light, with high brightness LED is visible under the transparent lid.
The whole wiring is protected against accidental contacts.
• 2 × PGM25
• 2 M20 × 1.5 rear outlets sealed with M20 × 1.5 caps and gaskets
• 4 wall mounting movable brackets
• 10 red plastic seals
Box for Ground Fault Circuit Interrupter or Din rail mounting electronic control
Allows mounting of a circuit breaker type Merlin Gerin Multi 9 (UL, CSA, IEC) and equivalent European ranges Vigi C60 or C60 (72mm maximum width = four 18mm modules), or electronic controllers described in this catalogue
Box basic equipment:
- 2 × PGM25
- Din rail
- Ground Fault Circuit Interrupter front plate
- 2 M20 × 1.5 rear outlets sealed with M20 × 1.5 caps and gaskets
- Ground block with 4 terminals dia. 5mm
- 4 wall mounting movable brackets
- 10 red plastic seals
Supplied without GFCI or electronic controller
Power junction boxes, three phases or three heating elements, with electromagnetic relay, fully wired
3 × 16A (AC1), 250V, terminal block with 5 terminals 2.5mm² screws and 5 screw terminals 6mm². Red indicator light for power supply and output green light (250V), transparent window.
3 × 25A (AC1), 250V, terminal block with 2 terminals 2.5mm² screws and 6 screw terminals 10mm². Red indicator light for power supply and output green light (250V), transparent lid.
.svg)
.svg)