APPLICATION AREAS

Agriculture & Farming

Driven by the world's growing population and demand for food, temperature control solutions are essential to this market as they are used to control the production and processing of agricultural and livestock products.

‍

Our products are designed to withstand the harsh environments of agricultural and livestock facilities. They are resistant to shocks, corrosion, vibrations, and extreme weather conditions. They are used for temperature control, ventilation, and defrosting to protect equipment.

‍

Here are some examples of the solutions we offer:

‍

  • ‍Ambient thermostats in rugged housings for controlling the temperature of livestock buildings, greenhouses, and ventilation systems. They are also suitable for controlling thermal management of livestock.
    ‍
  •  Flexible silicone heating panels of various shapes, used for applications such as poultry incubators, animal feeders, and tanks. They can be equipped with temperature sensors, temperature limiters, thermal fuses, and thermostats.
    ‍‍
  • Non-flexible silicone heating panels vulcanized on aluminum plates: for heating hoppers and tank bottoms.
    ‍‍
  • Infrared radiant tubes for heating livestock facilities or drying.
    ‍‍
  • Electric tracing with flexible silicone tapes for protecting equipment from freezing, such as drinkers, valves, water meters, and fuel tanks.

‍

  • Flexible     silicone heating belts and jackets, adapted to drums of different capacities.

‍‍

  • ATEX thermostats and limiters range that can be incorporated, designed for areas where there is a risk of explosion due to the presence of flammable substances. These substances can be gases, vapors, liquids, or dust. For example: fuel and chemical storage areas, biogas production, grain drying or milling, livestock effluent treatment.
    ‍‍
  • Different ATEX accessories such as heating cable terminations and self-stripping junction boxes capable of withstanding high temperatures.

‍

These products can be customised to meet your needs and application. We can pre-assemble them into a single unit or a sub-assembly that combines temperature control and safety devices.

‍

Please do not hesitate to contact us with your requirements. We will be happy to study them and give you the best advice.

‍

‍

Type 3ST3 - Immersion heater with 78mm × 66mm × 50mm aluminum enclosure. 1"1/4, 1"1/2, M45x2 fittings.

Type 3ST3 - Immersion heater with 78mm × 66mm × 50mm aluminum enclosure. 1"1/4, 1"1/2, M45x2 fittings.

See Product
Type 6YTPP - Heat tracing pipe mounting feet for connection boxes, includes gasket for flat self-regulating cables up to 6 x13mm, and for temperature sensor

Type 6YTPP - Heat tracing pipe mounting feet for connection boxes, includes gasket for flat self-regulating cables up to 6 x13mm, and for temperature sensor

See Product
Type 6YTPT, 6YTQT - Stainless steel mounting feet for connection boxes, snapped-on or screwed. Mounting on pipes by nylon ties or metal clamps.

Type 6YTPT, 6YTQT - Stainless steel mounting feet for connection boxes, snapped-on or screwed. Mounting on pipes by nylon ties or metal clamps.

See Product
Type ZD - Vacuum pressure switches - Low voltage circuit vacuum pressure switch

Type ZD - Vacuum pressure switches - Low voltage circuit vacuum pressure switch

See Product
Type ZC - Differential pressure switches - Low voltage circuit, IP65 waterproof differential pressure switch, various center threads.

Type ZC - Differential pressure switches - Low voltage circuit, IP65 waterproof differential pressure switch, various center threads.

See Product
Type ZA - Positive pressure switches - Low voltage circuit adjustable positive pressure switch

Type ZA - Positive pressure switches - Low voltage circuit adjustable positive pressure switch

See Product
Type ZT - Snap action, double poles air switch, center ¼” thread mounting, or surface mounting

Type ZT - Snap action, double poles air switch, center ¼” thread mounting, or surface mounting

See Product
Type ZQ - Positive pressure switche- Single pole snap action contact. Not adjustable set point. SPDT contact.

Type ZQ - Positive pressure switche- Single pole snap action contact. Not adjustable set point. SPDT contact.

See Product
Type MA - Adjustable set point positive pressure switches, Snap action contact pressure switches, field adjustable, for incorporation, SPDT contact

Type MA - Adjustable set point positive pressure switches, Snap action contact pressure switches, field adjustable, for incorporation, SPDT contact

See Product
Type MB - Adjustable set point positive pressure switches, Snap action contact pressure switches, field adjustable,SPDT contact, optional IP65 enclosure

Type MB - Adjustable set point positive pressure switches, Snap action contact pressure switches, field adjustable,SPDT contact, optional IP65 enclosure

See Product
Type ZK - Snap action contact air switch, single pole, momentary or latching action New high sensivity types

Type ZK - Snap action contact air switch, single pole, momentary or latching action New high sensivity types

See Product
Type BK - Very high temperature steatite connection blocks. Indirect pressure clamping, with pressure plate, 750V range

Type BK - Very high temperature steatite connection blocks. Indirect pressure clamping, with pressure plate, 750V range

See Product
Type BJ - Steatite connection blocks 450V range

Type BJ - Steatite connection blocks 450V range

See Product
Type BH - Ceramic insulators for heating elements, 400V range

Type BH - Ceramic insulators for heating elements, 400V range

See Product
Type BM - Ceramic terminal blocks for 3 phase asynchronous electrical motors 450V range (BM154,BM185,BM205,BM235,BM256,BM286,BM358)

Type BM - Ceramic terminal blocks for 3 phase asynchronous electrical motors 450V range (BM154,BM185,BM205,BM235,BM256,BM286,BM358)

See Product
Waterproof wall feed-through for adjustment shafts

Waterproof wall feed-through for adjustment shafts

See Product
Pocket tubes, Pocket grommets, flanges and fittings

Pocket tubes, Pocket grommets, flanges and fittings

See Product
Type 9VJAD - Flexible jacket heaters with digital display electronic controller, adjustable up to 120°C, surface mounted, for metal containers

Type 9VJAD - Flexible jacket heaters with digital display electronic controller, adjustable up to 120°C, surface mounted, for metal containers

See Product
Type 9VJ32 - Antifreeze flexible jacket heaters for glass or plastic containers

Type 9VJ32 - Antifreeze flexible jacket heaters for glass or plastic containers

See Product
Type 9JDF - Jacket heaters for 1000L IBC containers with tubular steel frame. One heating zone. Digital display electronic temperature controller, remote wall mounting

Type 9JDF - Jacket heaters for 1000L IBC containers with tubular steel frame. One heating zone. Digital display electronic temperature controller, remote wall mounting

See Product
Type 9VJF6 - Fixed temperature setting flexible jacket heaters for metal drums and 1000 liters IBC

Type 9VJF6 - Fixed temperature setting flexible jacket heaters for metal drums and 1000 liters IBC

See Product
Type Y8WR-Z - Electronic thermostat, NTC sensor, for heat trace pipe temperature control, vertical foot mounting on pipe

Type Y8WR-Z - Electronic thermostat, NTC sensor, for heat trace pipe temperature control, vertical foot mounting on pipe

See Product
Type Y8WR-X, Y8WR-Y - Electronic thermostat, NTC sensor, for heat trace pipe temperature control, remote wall mounting

Type Y8WR-X, Y8WR-Y - Electronic thermostat, NTC sensor, for heat trace pipe temperature control, remote wall mounting

See Product
Type Y8WJ-Z - Electronic Temp. controller, double digital display, multi-sensors, PID or ON-OFF action, heat trace pipe temperature control, vertical foot mounting on pipe

Type Y8WJ-Z - Electronic Temp. controller, double digital display, multi-sensors, PID or ON-OFF action, heat trace pipe temperature control, vertical foot mounting on pipe

See Product
Type Y8WJ-X, Y8WJ-Y - Electronic T° controller with double digital display, multi-sensors, PID or ON-OFF action, heat trace pipe temperature control, remote wall mounting

Type Y8WJ-X, Y8WJ-Y - Electronic T° controller with double digital display, multi-sensors, PID or ON-OFF action, heat trace pipe temperature control, remote wall mounting

See Product
Type Y8WH-Z - Electronic temperature controller with digital display, NTC sensor, for heat trace pipe temperature control, vertical foot mounting on pipe

Type Y8WH-Z - Electronic temperature controller with digital display, NTC sensor, for heat trace pipe temperature control, vertical foot mounting on pipe

See Product
Type Y8WH-X, Y8WH-Y - Electronic temperature controller with digital display, NTC sensor, for heat trace pipe temperature control, remote wall mounting

Type Y8WH-X, Y8WH-Y - Electronic temperature controller with digital display, NTC sensor, for heat trace pipe temperature control, remote wall mounting

See Product
Type Y1A2P, Y1B2P - Electronic room thermostats for heat tracing, metal box

Type Y1A2P, Y1B2P - Electronic room thermostats for heat tracing, metal box

See Product
Type Y0D8, Y0D9 - “Pigtail” bulb room thermostat, with built-in pilot light and 2 M20 cable glands for heat tracing application

Type Y0D8, Y0D9 - “Pigtail” bulb room thermostat, with built-in pilot light and 2 M20 cable glands for heat tracing application

See Product
Type YF62NC - Electronic room thermostats for heat tracing

Type YF62NC - Electronic room thermostats for heat tracing

See Product
Type YF7GNC - “Pigtail” bulb room thermostats for heat tracing

Type YF7GNC - “Pigtail” bulb room thermostats for heat tracing

See Product
Type Y381 - Temperature sensor, thermostat or level sensor enclosure

Type Y381 - Temperature sensor, thermostat or level sensor enclosure

See Product
TYpe Y3A4 - Miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

TYpe Y3A4 - Miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

See Product
Type Y3A3 - Miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

Type Y3A3 - Miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

See Product
Type Y3A2 - Sub-miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

Type Y3A2 - Sub-miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

See Product
Type Y3A1 - Sub-miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

Type Y3A1 - Sub-miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

See Product
Type Y307 - Big size enclosure for immersion heater, temperature sensor, level sensor or controls

Type Y307 - Big size enclosure for immersion heater, temperature sensor, level sensor or controls

See Product
Type Y306- Round enclosure for immersion heater or temperature sensor

Type Y306- Round enclosure for immersion heater or temperature sensor

See Product
Type Y305 - Enclosure for immersion heater

Type Y305 - Enclosure for immersion heater

See Product
Type Y304 - Enclosure for immersion heater, level sensor or temperature sensor

Type Y304 - Enclosure for immersion heater, level sensor or temperature sensor

See Product
Tye Y303 - Miniature enclosure for immersion heater, level sensor or temperature sensor

Tye Y303 - Miniature enclosure for immersion heater, level sensor or temperature sensor

See Product
Type Y3S7 - Big size enclosure for immersion heater or temperature sensor

Type Y3S7 - Big size enclosure for immersion heater or temperature sensor

See Product
Type Y3S5 - Medium size enclosure for immersion heater or temperature sensor

Type Y3S5 - Medium size enclosure for immersion heater or temperature sensor

See Product
Type Y3C6 - Polypropylene immersion heater enclosure for surface treatment baths and highly corrosive environments

Type Y3C6 - Polypropylene immersion heater enclosure for surface treatment baths and highly corrosive environments

See Product
Type DM5 - Vertical mounting, reed switch contact, polypropylene stem, dia. 20 × 16.4mm EPS foam float, cable output, side mounting bracket

Type DM5 - Vertical mounting, reed switch contact, polypropylene stem, dia. 20 × 16.4mm EPS foam float, cable output, side mounting bracket

See Product
Type DM3 - Vertical mounting, reed switch contact, polypropylene stem with M8 thread, cable output dia. 20 × 16.4mm EPS foam float

Type DM3 - Vertical mounting, reed switch contact, polypropylene stem with M8 thread, cable output dia. 20 × 16.4mm EPS foam float

See Product
Type 9STQ - Immersion heaters 182×130×132mm plastic enclosure. Fittings 1"1/4, 1"1/2, M45x2. Electronic PID, with or without manual reset thermostat.

Type 9STQ - Immersion heaters 182×130×132mm plastic enclosure. Fittings 1"1/4, 1"1/2, M45x2. Electronic PID, with or without manual reset thermostat.

See Product
Type Y261 - 3 parallel ways connection box for heat tracing cables, with built-in antifreeze thermostat

Type Y261 - 3 parallel ways connection box for heat tracing cables, with built-in antifreeze thermostat

See Product
Type Y260 - 3 parallel ways connection box for heat tracing cables, without thermostat

Type Y260 - 3 parallel ways connection box for heat tracing cables, without thermostat

See Product
Type Y29C, Y29D - Connection box, pipe mounting leg, for two traditional or self-regulating cables, one power supply cable and temperature sensor cable

Type Y29C, Y29D - Connection box, pipe mounting leg, for two traditional or self-regulating cables, one power supply cable and temperature sensor cable

See Product
Type Y28 - 4 cross ways connection box for heat tracing cables, without thermostat, for traditional or self-regulating cables

Type Y28 - 4 cross ways connection box for heat tracing cables, without thermostat, for traditional or self-regulating cables

See Product
Type 9T10 - Cartridge heaters dia. 10mm, with built-in thermostat, M14 × 1.5 thread

Type 9T10 - Cartridge heaters dia. 10mm, with built-in thermostat, M14 × 1.5 thread

See Product
Type 9STJ - Full stainless steel immersion heater, without brazing, 105×105×100mm stainless steel enclosure. Stainless steel 1"1/2 fitting.

Type 9STJ - Full stainless steel immersion heater, without brazing, 105×105×100mm stainless steel enclosure. Stainless steel 1"1/2 fitting.

See Product
Type 9STB - Immersion heaters 182×130×120mm plastic enclosure. Fittings 1"1/2, M45x2. With mechanical or electronic temperature control.

Type 9STB - Immersion heaters 182×130×120mm plastic enclosure. Fittings 1"1/2, M45x2. With mechanical or electronic temperature control.

See Product
Type 9ST5 - Standard immersion heater with aluminum enclosure, 105 × 105 × 96mm, with and without thermostat

Type 9ST5 - Standard immersion heater with aluminum enclosure, 105 × 105 × 96mm, with and without thermostat

See Product
Type 9ST4 - Immersion heater with 78mm × 78mm × 74mm aluminum enclosure. 1"1/4, 1"1/2, M45x2 fittings. With or without thermostat.

Type 9ST4 - Immersion heater with 78mm × 78mm × 74mm aluminum enclosure. 1"1/4, 1"1/2, M45x2 fittings. With or without thermostat.

See Product
Type 9ST2 - Immersion heater with round enclosure, dia. 58 × 75mm. 1"1/4, 1"1/2, M45x2 fittings.

Type 9ST2 - Immersion heater with round enclosure, dia. 58 × 75mm. 1"1/4, 1"1/2, M45x2 fittings.

See Product
Type 9SFN202, 9SFN502 - Renewable energy 1"1/2 and M45x2 immersion heaters, 12 and 24V power supply with 230V auxiliary heating element, with connection box

Type 9SFN202, 9SFN502 - Renewable energy 1"1/2 and M45x2 immersion heaters, 12 and 24V power supply with 230V auxiliary heating element, with connection box

See Product
Type 9SFN200, 9SFN500 - Renewable energy 1"1/2 and M45x2 immersion heaters, 12 and 24V power supply with 230V auxiliary heating element

Type 9SFN200, 9SFN500 - Renewable energy 1"1/2 and M45x2 immersion heaters, 12 and 24V power supply with 230V auxiliary heating element

See Product
Type 4YC - Miniature temperature limiters, dedicated to heat pump application using R290 (Propane). Calibration up to 90°C

Type 4YC - Miniature temperature limiters, dedicated to heat pump application using R290 (Propane). Calibration up to 90°C

See Product
Type 9AD - Heating flat ribbons in silicone, width 35 mm, maximum length 10m, for electric tracing

Type 9AD - Heating flat ribbons in silicone, width 35 mm, maximum length 10m, for electric tracing

See Product
Type 9VJV6 - Fixed temperature setting flexible jacket heaters for glass or plastic containers

Type 9VJV6 - Fixed temperature setting flexible jacket heaters for glass or plastic containers

See Product
Type Y8WTZ - Stirrer speed controller with IP65 enclosure and compact full stainless steel stirrer for drums and IBC

Type Y8WTZ - Stirrer speed controller with IP65 enclosure and compact full stainless steel stirrer for drums and IBC

See Product
Type 9SWR2 - Immersion heater for 1000 liters IBC

Type 9SWR2 - Immersion heater for 1000 liters IBC

See Product
Type 9V4 - Base heater for 55 gallons metal drum

Type 9V4 - Base heater for 55 gallons metal drum

See Product
Type 9VJMA - Flexible jacket heaters with adjustable electronic thermostat, surface mounted, for glass or plastic containers

Type 9VJMA - Flexible jacket heaters with adjustable electronic thermostat, surface mounted, for glass or plastic containers

See Product
Type 9VJEF - Flexible jacket heaters with remote digital display electronic controller for glass or plastic containers

Type 9VJEF - Flexible jacket heaters with remote digital display electronic controller for glass or plastic containers

See Product
Type 4VA, VB - Miniature temperature limiters, not current sensing, calibration up to 100°C (212°F), cable or wires connection

Type 4VA, VB - Miniature temperature limiters, not current sensing, calibration up to 100°C (212°F), cable or wires connection

See Product
Type 9VJBF - Jacket heaters for 1000L IBC containers. Two independent heating zones. 2 digital display electronic temperature controllers, adjustment up to 120°C, remote wall mounting

Type 9VJBF - Jacket heaters for 1000L IBC containers. Two independent heating zones. 2 digital display electronic temperature controllers, adjustment up to 120°C, remote wall mounting

See Product
Type 9VJBE - Jacket heaters for 1000L IBC containers. Two independent heating zones. 2 Miniature electronic thermostats, adjustment by 20-125°C knobs

Type 9VJBE - Jacket heaters for 1000L IBC containers. Two independent heating zones. 2 Miniature electronic thermostats, adjustment by 20-125°C knobs

See Product
Type 9VJBD - Jacket heaters for 1000L IBC containers. Two independent heating zones. 2 digital display electronic temperature controllers

Type 9VJBD - Jacket heaters for 1000L IBC containers. Two independent heating zones. 2 digital display electronic temperature controllers

See Product
Type 9VJAF - Flexible jacket heaters with digital display electronic controller, adjustable up to 120°C, remote wall mounting, for metal containers

Type 9VJAF - Flexible jacket heaters with digital display electronic controller, adjustable up to 120°C, remote wall mounting, for metal containers

See Product
Type 9VJDA - Jacket heaters for 1000L IBC containers with tubular steel frame. One heating zone. Miniature electronic thermostat

Type 9VJDA - Jacket heaters for 1000L IBC containers with tubular steel frame. One heating zone. Miniature electronic thermostat

See Product
Type 9VJAE - Flexible jacket heaters with 20-125°C adjustable electronic thermostat, surface mounted, for metal containers

Type 9VJAE - Flexible jacket heaters with 20-125°C adjustable electronic thermostat, surface mounted, for metal containers

See Product
Type 9CH - Commercial and industrial convection radiators Upward blowing models

Type 9CH - Commercial and industrial convection radiators Upward blowing models

See Product
Type 9CG1 - Commercial and industrial convection radiators 110mm compact range, IP65, without fan

Type 9CG1 - Commercial and industrial convection radiators 110mm compact range, IP65, without fan

See Product
Type 9CB - Industrial electric baseboard heaters, natural convection, width 130mm, IP69K, IK10

Type 9CB - Industrial electric baseboard heaters, natural convection, width 130mm, IP69K, IK10

See Product
Type 9CA - Small industrial electric baseboard heaters, IP69K, IK10, with 1 or 2 finned heating elements

Type 9CA - Small industrial electric baseboard heaters, IP69K, IK10, with 1 or 2 finned heating elements

See Product
Type 9AC - Silicone rubber heating belts for metal drums, with remote electronic control, on-off action, 0-120°C or 0-200°C

Type 9AC - Silicone rubber heating belts for metal drums, with remote electronic control, on-off action, 0-120°C or 0-200°C

See Product
Type 9AB - Silicone rubber heating belts for metal drums, with surface mounted bulb and capillary thermostat

Type 9AB - Silicone rubber heating belts for metal drums, with surface mounted bulb and capillary thermostat

See Product
Type Y27 - 3 ways “Tee” connection box for heat tracing cables, without thermostat, for traditional or self-regulating cables

Type Y27 - 3 ways “Tee” connection box for heat tracing cables, without thermostat, for traditional or self-regulating cables

See Product
Type 6YTNM - Silicone sleeves for connection of heating cable on power supply wires (field or workshop assembly). Filling with room temperature vulcanizing silicone resin (RTV)

Type 6YTNM - Silicone sleeves for connection of heating cable on power supply wires (field or workshop assembly). Filling with room temperature vulcanizing silicone resin (RTV)

See Product
Type BC - Very high temperature steatite connection blocks Indirect pressure clamping, with pressure plate, 750V range

Type BC - Very high temperature steatite connection blocks Indirect pressure clamping, with pressure plate, 750V range

See Product
Type BA - Steatite connection blocks, 250V range With pressure screws, protected against electric shock

Type BA - Steatite connection blocks, 250V range With pressure screws, protected against electric shock

See Product
Type Y514 - 4 ways in line connection box for heat tracing cables, with insulation piercing terminals, for self-regulating cables

Type Y514 - 4 ways in line connection box for heat tracing cables, with insulation piercing terminals, for self-regulating cables

See Product
Type Y501, 502 - 2 ways in line connection box for heat tracing cables, with insulation piercing terminals, for self-regulating cables

Type Y501, 502 - 2 ways in line connection box for heat tracing cables, with insulation piercing terminals, for self-regulating cables

See Product
Type Y25 - 3 ways in T connection box for heat tracing cables, for traditional or self-regulating cables

Type Y25 - 3 ways in T connection box for heat tracing cables, for traditional or self-regulating cables

See Product
Type Y24 - 2 ways in line connection box for heat tracing cables, for traditional or self-regulating cables

Type Y24 - 2 ways in line connection box for heat tracing cables, for traditional or self-regulating cables

See Product
Type Y22 - 2 parallel ways connection box for heat tracing cables, with 2 pilot lights and built-in antifreeze thermostat

Type Y22 - 2 parallel ways connection box for heat tracing cables, with 2 pilot lights and built-in antifreeze thermostat

See Product
Type TNJB, TPJB, TSJB, TJJB - M20x1.5 temperature sensors for mounting in cable glands holes or threads

Type TNJB, TPJB, TSJB, TJJB - M20x1.5 temperature sensors for mounting in cable glands holes or threads

See Product
Type 49JB - M20x1.5 Thermostats for mounting in cable glands holes or threads, for boxes external ambient temperature control

Type 49JB - M20x1.5 Thermostats for mounting in cable glands holes or threads, for boxes external ambient temperature control

See Product
Type 49C - Thermostats overmolded on heat tracing cables supplied by customer

Type 49C - Thermostats overmolded on heat tracing cables supplied by customer

See Product
Type 9UW - Overmolding of terminations heating cable supplied by customer

Type 9UW - Overmolding of terminations heating cable supplied by customer

See Product
Type 6YTNE - Termination caps for closing the free end of round and flat heating cables

Type 6YTNE - Termination caps for closing the free end of round and flat heating cables

See Product
Type YF5GPP - Adjustable set point rod thermostat designed for highly basic or acid corrosive liquids or environments.

Type YF5GPP - Adjustable set point rod thermostat designed for highly basic or acid corrosive liquids or environments.

See Product
Type Y22D9 - Thermostats with fixed setting ambiance or antifreeze thermostat, IP65 housing, cable gland output, two pilot lights

Type Y22D9 - Thermostats with fixed setting ambiance or antifreeze thermostat, IP65 housing, cable gland output, two pilot lights

See Product
Type Y2U - Thermostat with external knob adjustment, IP65, with two pilot lights, for industrial jacket and blanket heaters.

Type Y2U - Thermostat with external knob adjustment, IP65, with two pilot lights, for industrial jacket and blanket heaters.

See Product
Type Y2T2, Y2T3 - Electronic thermostats, remote sensor, IP69K enclosure in PA66 and PC

Type Y2T2, Y2T3 - Electronic thermostats, remote sensor, IP69K enclosure in PA66 and PC

See Product
Type Y2D, Y2M - Bulb and capillary thermostats,with 2 built-in pilot lights

Type Y2D, Y2M - Bulb and capillary thermostats,with 2 built-in pilot lights

See Product
Type Y09 - Combination of adjustable set point thermostat and manual reset high limit, IP54 commercial housing, capillary output, wall mounting

Type Y09 - Combination of adjustable set point thermostat and manual reset high limit, IP54 commercial housing, capillary output, wall mounting

See Product

Application domain's products

Find our products

We produce over 6 million components per year and manage over 10,000 codes
for finished products. View and download our catalogs to stay up-to-date!

See cataloguesSee Products