Our Products

Find here all our categorized products by entering your keywords
_{(i.e. : thermostats, fail safe, air heating, immersion heater ...)}

Thank you! Your submission has been received!

Oops! Something went wrong while submitting the form.

Heating Equipment

Flow through heaters for Heat Pump

Silicon Heaters

Jacket Heaters

Spa Heaters

Fan Heaters

Immersion Heaters

Finned Heaters

Controls, safety & Regulation

Fire Protection Fuses

Humidistats

Flow Switches

Level Switches

Pressure Switches

Automatic Thermostat

Manual Reset Thermostat

Components & Accessories

Swimming Pool and Spa Fittings

Ingress Protection Housings

Ceramic Blocks

Fire & Damper Mechanisms

Controls, Safety & Regulation

Controls, Safety & Regulation

Heating Equipment

Heating Equipment

Components & Accessories

Components & Accessories

All products

Type R1X - Paddle flow switches, reed switch contact, external body.

Type R1X - Paddle flow switches, reed switch contact, external body.

Type 85 - 3 poles manual reset thermal cut-out, fail safe (up to 500°C) 30A 250/400VAC

Type 85 - 3 poles manual reset thermal cut-out, fail safe (up to 500°C) 30A 250/400VAC

Type Y22D9 - Thermostats with fixed setting ambiance or antifreeze thermostat, IP65 housing, cable gland output, two pilot lights

Type Y22D9 - Thermostats with fixed setting ambiance or antifreeze thermostat, IP65 housing, cable gland output, two pilot lights

Type 4YC - Miniature temperature limiters, dedicated to heat pump application using R290 (Propane). Calibration up to 90°C

Type 4YC - Miniature temperature limiters, dedicated to heat pump application using R290 (Propane). Calibration up to 90°C

Type 3ST3 - Immersion heater with 78mm × 66mm × 50mm aluminum enclosure. 1"1/4, 1"1/2, M45x2 fittings.

Type 3ST3 - Immersion heater with 78mm × 66mm × 50mm aluminum enclosure. 1"1/4, 1"1/2, M45x2 fittings.

Type 2H15 - High rating precision switch for controls. Up to 25A 250V and 16A 400V (-60°C~+85°C)

Type 2H15 - High rating precision switch for controls. Up to 25A 250V and 16A 400V (-60°C~+85°C)

Type 6YTPT, 6YTQT - Stainless steel mounting feet for connection boxes, snapped-on or screwed. Mounting on pipes by nylon ties or metal clamps.

Type 6YTPT, 6YTQT - Stainless steel mounting feet for connection boxes, snapped-on or screwed. Mounting on pipes by nylon ties or metal clamps.

Type 6YTPP - Heat tracing pipe mounting feet for connection boxes, includes gasket for flat self-regulating cables up to 6 x13mm, and for temperature sensor

Type 6YTPP - Heat tracing pipe mounting feet for connection boxes, includes gasket for flat self-regulating cables up to 6 x13mm, and for temperature sensor

Type 8GB100500 - Bulb and capillary thermostat, high temperature range 100-500°C

Type 8GB100500 - Bulb and capillary thermostat, high temperature range 100-500°C

Type ZK - Snap action contact air switch, single pole, momentary or latching action New high sensivity types

Type ZK - Snap action contact air switch, single pole, momentary or latching action New high sensivity types

Type MB - Adjustable set point positive pressure switches, Snap action contact pressure switches, field adjustable,SPDT contact, optional IP65 enclosure

Type MB - Adjustable set point positive pressure switches, Snap action contact pressure switches, field adjustable,SPDT contact, optional IP65 enclosure

Type MA - Adjustable set point positive pressure switches, Snap action contact pressure switches, field adjustable, for incorporation, SPDT contact

Type MA - Adjustable set point positive pressure switches, Snap action contact pressure switches, field adjustable, for incorporation, SPDT contact

Type ZQ - Positive pressure switche- Single pole snap action contact. Not adjustable set point. SPDT contact.

Type ZQ - Positive pressure switche- Single pole snap action contact. Not adjustable set point. SPDT contact.

Type ZT - Snap action, double poles air switch, center ¼” thread mounting, or surface mounting

Type ZT - Snap action, double poles air switch, center ¼” thread mounting, or surface mounting

Type ZA - Positive pressure switches - Low voltage circuit adjustable positive pressure switch

Type ZA - Positive pressure switches - Low voltage circuit adjustable positive pressure switch

Type ZC - Differential pressure switches - Low voltage circuit, IP65 waterproof differential pressure switch, various center threads.

Type ZC - Differential pressure switches - Low voltage circuit, IP65 waterproof differential pressure switch, various center threads.

Type ZD - Vacuum pressure switches - Low voltage circuit vacuum pressure switch

Type ZD - Vacuum pressure switches - Low voltage circuit vacuum pressure switch

Type 2PE2N6 - Electronic thermostat, 16A, knob adjustment, remote sensor, NTC temperature sensor.

Type 2PE2N6 - Electronic thermostat, 16A, knob adjustment, remote sensor, NTC temperature sensor.

Type 2PE2P6 - Electronic thermostat, 16A, knob adjustment, remote sensor, Pt100 temperature sensor.

Type 2PE2P6 - Electronic thermostat, 16A, knob adjustment, remote sensor, Pt100 temperature sensor.

Type 5EY, 5ET, 5EV, 5EX - Brass fusible fusible links with eutectic alloys, for direct handling of heavy loads

Type 5EY, 5ET, 5EV, 5EX - Brass fusible fusible links with eutectic alloys, for direct handling of heavy loads

Type 52B - Thermal actuators with pushing action, for fire dampers, operated by eutectic fusible link

Type 52B - Thermal actuators with pushing action, for fire dampers, operated by eutectic fusible link

Type 52A - Thermal actuators with pulling action, for fire dampers, operated by eutectic fusible link

Type 52A - Thermal actuators with pulling action, for fire dampers, operated by eutectic fusible link

Type 51B - Thermal actuators with pushing action, for fire dampers, operated by thermal glass bulb

Type 51B - Thermal actuators with pushing action, for fire dampers, operated by thermal glass bulb

Type 51A - Thermal actuators with pulling action, for fire dampers, operated by thermal bulb

Type 51A - Thermal actuators with pulling action, for fire dampers, operated by thermal bulb

Type 5420A - Multiplied action mechanisms with thermal glass bulbs, for application in smoke outlets

Type 5420A - Multiplied action mechanisms with thermal glass bulbs, for application in smoke outlets

Type 58L - Breakable glass bulb fire detection link, miniature type

Type 58L - Breakable glass bulb fire detection link, miniature type

Type 59A8 - Electric fire detection switches with thermal glass bulb for air duct

Type 59A8 - Electric fire detection switches with thermal glass bulb for air duct

Type 5EP, 5ES, 5ED, 5EH - Copper fusible links with eutectic alloys, for medium loads

Type 5EP, 5ES, 5ED, 5EH - Copper fusible links with eutectic alloys, for medium loads

Type 5EE, 5EJ, 5EN, 5EA - Eutectic alloys fusible links for medium loads

Type 5EE, 5EJ, 5EN, 5EA - Eutectic alloys fusible links for medium loads

Type 5EQ, 5EW, 5EK,5EO - Fast triggering eutectic alloys fusible links

Type 5EQ, 5EW, 5EK,5EO - Fast triggering eutectic alloys fusible links

Type 58Z- High load breakable glass bulb heat responsive link for heavy loads

Type 58Z- High load breakable glass bulb heat responsive link for heavy loads

Type 5516, 5518, 5525, 5540 - Multiplied action mechanisms for eutectic fusible links, for application in smoke outlets

Type 5516, 5518, 5525, 5540 - Multiplied action mechanisms for eutectic fusible links, for application in smoke outlets

Types 5E2, 5E3, 5E4, 5E5, 5E6 - Miniature eutectic alloy fusible links for large or very large series applications

Types 5E2, 5E3, 5E4, 5E5, 5E6 - Miniature eutectic alloy fusible links for large or very large series applications

Type 4C - 3 poles manual reset disc thermostat.

Type 4C - 3 poles manual reset disc thermostat.

Type BH - Ceramic insulators for heating elements, 400V range

Type BH - Ceramic insulators for heating elements, 400V range

Type BJ - Steatite connection blocks 450V range

Type BJ - Steatite connection blocks 450V range

Type BK - Very high temperature steatite connection blocks. Indirect pressure clamping, with pressure plate, 750V range

Type BK - Very high temperature steatite connection blocks. Indirect pressure clamping, with pressure plate, 750V range

Type BM - Ceramic terminal blocks for 3 phase asynchronous electrical motors 450V range (BM154,BM185,BM205,BM235,BM256,BM286,BM358)

Type BM - Ceramic terminal blocks for 3 phase asynchronous electrical motors 450V range (BM154,BM185,BM205,BM235,BM256,BM286,BM358)

Type 8G - Single pole control thermostat, bulb and capillary

Type 8G - Single pole control thermostat, bulb and capillary

Type 5MA3-F - Wired thermal fuses, for insertion into 8.5mm I.D. pocket (thermowells)

Type 5MA3-F - Wired thermal fuses, for insertion into 8.5mm I.D. pocket (thermowells)

Waterproof wall feed-through for adjustment shafts

Waterproof wall feed-through for adjustment shafts

Pocket tubes, Pocket grommets, flanges and fittings

Pocket tubes, Pocket grommets, flanges and fittings

Type 9VJDA - Jacket heaters for 1000L IBC containers with tubular steel frame. One heating zone. Miniature electronic thermostat

Type 9VJDA - Jacket heaters for 1000L IBC containers with tubular steel frame. One heating zone. Miniature electronic thermostat

Type 9VJF6 - Fixed temperature setting flexible jacket heaters for metal drums and 1000 liters IBC

Type 9VJF6 - Fixed temperature setting flexible jacket heaters for metal drums and 1000 liters IBC

Type 9JDF - Jacket heaters for 1000L IBC containers with tubular steel frame. One heating zone. Digital display electronic temperature controller, remote wall mounting

Type 9JDF - Jacket heaters for 1000L IBC containers with tubular steel frame. One heating zone. Digital display electronic temperature controller, remote wall mounting

Type 9VJ32 - Antifreeze flexible jacket heaters for glass or plastic containers

Type 9VJ32 - Antifreeze flexible jacket heaters for glass or plastic containers

Type 9VJAD - Flexible jacket heaters with digital display electronic controller, adjustable up to 120°C, surface mounted, for metal containers

Type 9VJAD - Flexible jacket heaters with digital display electronic controller, adjustable up to 120°C, surface mounted, for metal containers

Type Y8WH-X, Y8WH-Y - Electronic temperature controller with digital display, NTC sensor, for heat trace pipe temperature control, remote wall mounting

Type Y8WH-X, Y8WH-Y - Electronic temperature controller with digital display, NTC sensor, for heat trace pipe temperature control, remote wall mounting

Type Y8WH-Z - Electronic temperature controller with digital display, NTC sensor, for heat trace pipe temperature control, vertical foot mounting on pipe

Type Y8WH-Z - Electronic temperature controller with digital display, NTC sensor, for heat trace pipe temperature control, vertical foot mounting on pipe

Type Y8WJ-X, Y8WJ-Y - Electronic T° controller with double digital display, multi-sensors, PID or ON-OFF action, heat trace pipe temperature control, remote wall mounting

Type Y8WJ-X, Y8WJ-Y - Electronic T° controller with double digital display, multi-sensors, PID or ON-OFF action, heat trace pipe temperature control, remote wall mounting

Type Y8WJ-Z - Electronic Temp. controller, double digital display, multi-sensors, PID or ON-OFF action, heat trace pipe temperature control, vertical foot mounting on pipe

Type Y8WJ-Z - Electronic Temp. controller, double digital display, multi-sensors, PID or ON-OFF action, heat trace pipe temperature control, vertical foot mounting on pipe

Type Y8WR-X, Y8WR-Y - Electronic thermostat, NTC sensor, for heat trace pipe temperature control, remote wall mounting

Type Y8WR-X, Y8WR-Y - Electronic thermostat, NTC sensor, for heat trace pipe temperature control, remote wall mounting

Type Y8WR-Z - Electronic thermostat, NTC sensor, for heat trace pipe temperature control, vertical foot mounting on pipe

Type Y8WR-Z - Electronic thermostat, NTC sensor, for heat trace pipe temperature control, vertical foot mounting on pipe

Type Y3A3 - Miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

Type Y3A3 - Miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

Type 6YTTL05- Guillotine notching plier for cutting the heating zone between the conductors of oblong self-regulating cables

Type 6YTTL05- Guillotine notching plier for cutting the heating zone between the conductors of oblong self-regulating cables

TYpe 6YTTL04 - Exclusive stripping pliers for heat tracing cables with dedicated cutting blades according to all cable dimensions

TYpe 6YTTL04 - Exclusive stripping pliers for heat tracing cables with dedicated cutting blades according to all cable dimensions

Type BES, BET - Snap-On PA66 terminal, for large enclosures, mixed size terminals

Type BES, BET - Snap-On PA66 terminal, for large enclosures, mixed size terminals

Type Y3A1 - Sub-miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

Type Y3A1 - Sub-miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

Type Y3A2 - Sub-miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

Type Y3A2 - Sub-miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

TYpe Y3A4 - Miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

TYpe Y3A4 - Miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

Type Y381 - Temperature sensor, thermostat or level sensor enclosure

Type Y381 - Temperature sensor, thermostat or level sensor enclosure

Type Y3B2 - Immersion heater housing for commercial water heater tanks

Type Y3B2 - Immersion heater housing for commercial water heater tanks

Type 66R2, 66R6 - Stainless steel fitting with wide rotating flange, welded thread and heating elements flange

Type 66R2, 66R6 - Stainless steel fitting with wide rotating flange, welded thread and heating elements flange

Type YF7GNC - “Pigtail” bulb room thermostats for heat tracing

Type YF7GNC - “Pigtail” bulb room thermostats for heat tracing

Type YF62NC - Electronic room thermostats for heat tracing

Type YF62NC - Electronic room thermostats for heat tracing

Type Y0D8, Y0D9 - “Pigtail” bulb room thermostat, with built-in pilot light and 2 M20 cable glands for heat tracing application

Type Y0D8, Y0D9 - “Pigtail” bulb room thermostat, with built-in pilot light and 2 M20 cable glands for heat tracing application

Type Y1A2P, Y1B2P - Electronic room thermostats for heat tracing, metal box

Type Y1A2P, Y1B2P - Electronic room thermostats for heat tracing, metal box

Type Y1A8G, Y1B8G - “Pigtail” bulb room thermostats with metal housing, for heat tracing

Type Y1A8G, Y1B8G - “Pigtail” bulb room thermostats with metal housing, for heat tracing

Type DM6- Vertical mounting, reed switch contact, polypropylene stem with side mounting bracket, dia. 29 × 16.4mm EPS foam float,

Type DM6- Vertical mounting, reed switch contact, polypropylene stem with side mounting bracket, dia. 29 × 16.4mm EPS foam float,

Type DT1 - Horizontal mounting, reed switch contact, PBT stem, hollow PBT float, Cable output, ½" NPT thread

Type DT1 - Horizontal mounting, reed switch contact, PBT stem, hollow PBT float, Cable output, ½" NPT thread

Type DT3 - Horizontal mounting, reed switch contact, PBT stem, hollow PBT float, Cable output, ½”BSPP thread

Type DT3 - Horizontal mounting, reed switch contact, PBT stem, hollow PBT float, Cable output, ½”BSPP thread

Type DT4 - Horizontal mounting, reed switch contact, PBT stem, hollow PBT float, 6.35 × 0.8 QC terminals, ½"BSPP thread

Type DT4 - Horizontal mounting, reed switch contact, PBT stem, hollow PBT float, 6.35 × 0.8 QC terminals, ½"BSPP thread

Type 66RC - Brass fittings, double thread, with side grounding terminal

Type 66RC - Brass fittings, double thread, with side grounding terminal

Type 66RE - Brass fitting, using 3 screws rotation ring, for common immersion heaters

Type 66RE - Brass fitting, using 3 screws rotation ring, for common immersion heaters

Type Y3C6 - Polypropylene immersion heater enclosure for surface treatment baths and highly corrosive environments

Type Y3C6 - Polypropylene immersion heater enclosure for surface treatment baths and highly corrosive environments

Type Y3S5 - Medium size enclosure for immersion heater or temperature sensor

Type Y3S5 - Medium size enclosure for immersion heater or temperature sensor

Type Y3S7 - Big size enclosure for immersion heater or temperature sensor

Type Y3S7 - Big size enclosure for immersion heater or temperature sensor

Tye Y303 - Miniature enclosure for immersion heater, level sensor or temperature sensor

Tye Y303 - Miniature enclosure for immersion heater, level sensor or temperature sensor

Type Y304 - Enclosure for immersion heater, level sensor or temperature sensor

Type Y304 - Enclosure for immersion heater, level sensor or temperature sensor

Type Y305 - Enclosure for immersion heater

Type Y305 - Enclosure for immersion heater

Type Y306- Round enclosure for immersion heater or temperature sensor

Type Y306- Round enclosure for immersion heater or temperature sensor

Type Y307 - Big size enclosure for immersion heater, temperature sensor, level sensor or controls

Type Y307 - Big size enclosure for immersion heater, temperature sensor, level sensor or controls

Type DM5 - Vertical mounting, reed switch contact, polypropylene stem, dia. 20 × 16.4mm EPS foam float, cable output, side mounting bracket

Type DM5 - Vertical mounting, reed switch contact, polypropylene stem, dia. 20 × 16.4mm EPS foam float, cable output, side mounting bracket

Type DM1 - Reed switch contact, stem with M8 thread, cable output, dia. 25 × 15mm polypropylene float

Type DM1 - Reed switch contact, stem with M8 thread, cable output, dia. 25 × 15mm polypropylene float

Type DM3 - Vertical mounting, reed switch contact, polypropylene stem with M8 thread, cable output dia. 20 × 16.4mm EPS foam float

Type DM3 - Vertical mounting, reed switch contact, polypropylene stem with M8 thread, cable output dia. 20 × 16.4mm EPS foam float

Type Y260 - 3 parallel ways connection box for heat tracing cables, without thermostat

Type Y260 - 3 parallel ways connection box for heat tracing cables, without thermostat

Type Y261 - 3 parallel ways connection box for heat tracing cables, with built-in antifreeze thermostat

Type Y261 - 3 parallel ways connection box for heat tracing cables, with built-in antifreeze thermostat

Type 9STQ - Immersion heaters 182×130×132mm plastic enclosure. Fittings 1"1/4, 1"1/2, M45x2. Electronic PID, with or without manual reset thermostat.

Type 9STQ - Immersion heaters 182×130×132mm plastic enclosure. Fittings 1"1/4, 1"1/2, M45x2. Electronic PID, with or without manual reset thermostat.

Type Y28 - 4 cross ways connection box for heat tracing cables, without thermostat, for traditional or self-regulating cables

Type Y28 - 4 cross ways connection box for heat tracing cables, without thermostat, for traditional or self-regulating cables

Type Y29C, Y29D - Connection box, pipe mounting leg, for two traditional or self-regulating cables, one power supply cable and temperature sensor cable

Type Y29C, Y29D - Connection box, pipe mounting leg, for two traditional or self-regulating cables, one power supply cable and temperature sensor cable

Type 6YTNE - Termination caps for closing the free end of round and flat heating cables

Type 6YTNE - Termination caps for closing the free end of round and flat heating cables

Type 9UW - Overmolding of terminations heating cable supplied by customer

Type 9UW - Overmolding of terminations heating cable supplied by customer

Type 49C - Thermostats overmolded on heat tracing cables supplied by customer

Type 49C - Thermostats overmolded on heat tracing cables supplied by customer

Type 49JB - M20x1.5 Thermostats for mounting in cable glands holes or threads, for boxes external ambient temperature control

Type 49JB - M20x1.5 Thermostats for mounting in cable glands holes or threads, for boxes external ambient temperature control

Type TNJB, TPJB, TSJB, TJJB - M20x1.5 temperature sensors for mounting in cable glands holes or threads

Type TNJB, TPJB, TSJB, TJJB - M20x1.5 temperature sensors for mounting in cable glands holes or threads

Type Y22 - 2 parallel ways connection box for heat tracing cables, with 2 pilot lights and built-in antifreeze thermostat

Type Y22 - 2 parallel ways connection box for heat tracing cables, with 2 pilot lights and built-in antifreeze thermostat

Type Y501, 502 - 2 ways in line connection box for heat tracing cables, with insulation piercing terminals, for self-regulating cables

Type Y501, 502 - 2 ways in line connection box for heat tracing cables, with insulation piercing terminals, for self-regulating cables

Type Y514 - 4 ways in line connection box for heat tracing cables, with insulation piercing terminals, for self-regulating cables

Type Y514 - 4 ways in line connection box for heat tracing cables, with insulation piercing terminals, for self-regulating cables

Type 6YTNM - Silicone sleeves for connection of heating cable on power supply wires (field or workshop assembly). Filling with room temperature vulcanizing silicone resin (RTV)

Type 6YTNM - Silicone sleeves for connection of heating cable on power supply wires (field or workshop assembly). Filling with room temperature vulcanizing silicone resin (RTV)

Type Y24 - 2 ways in line connection box for heat tracing cables, for traditional or self-regulating cables

Type Y24 - 2 ways in line connection box for heat tracing cables, for traditional or self-regulating cables

Find our products

We produce over 6 million components per year and manage over 10,000 codes
for finished products. View and download our catalogs to stay up-to-date!

See catalogues See Products