The industrial sector is a constantly growing market driven by innovation and increasing demand for products and services.

Our products and solutions are designed to meet the specific requirements of industrial customers and their maintenance. They are available in a variety of configurations taht can be customised:

‍

• ‍Electromechanical thermostats with bulb or probe and their protective housing, designed to ensure temperature control of gases and liquids via a glove finger applicable to corrosive environments.
  ‍‍

• Electromechanical safety devices, single-phase or three-phase, up to 30A/400VAC to T125, used in professional coffee machines, ovens, and ovens.
  ‍‍

• ‍A range of ATEX thermostats and limiters that can be incorporated, designed to control temperatures in areas where there is a risk of explosion of gas or dust. The cases of use and the corresponding certifications are detailed in the dedicated catalog.
  ‍‍

• Flanged or screw-in immersion heaters, offered in different powers and surface loads. Their heating elements can be made of AISI304 or Incolloy 800 (optionalAISI316, AISI 321 or Incolloy 825).
  ‍‍

• ‍Resistances with or without fins in U shape in stainless steel 304L, designed for professional OEMs. Different materials are available depending on your application: SS 201, 316, 321, or Incolloy 800.
  ‍‍

• Covers and heating belts for metal, plastic or glass tanks, used for antifreeze protection, heating, temperature maintenance, to reduce viscosity, etc. They integrate a regulation and limiter system and apply to different container sizes from 18L to 1000L. Specific model can be made to measure.
  ‍‍

• Flexible silicone heating panels of various shapes or non-flexible, vulcanized on aluminum plate.
  ‍

• Protective or incorporation housings for installations where resistance to heavy water drops is required.
  ‍‍

• ‍Modular control boxes that can be configured according to the control organ, safety, material of the box and control panel
  ‍‍

• Electric tracing with flexible silicone tapes, connection boxes, Self-clamping waterproof ATEX version and over-molding
  ‍‍

• Ceramic electrical connection terminals with high breakdown voltage that can accommodate35mm² cables, maximum voltages of 750VAC, capable of withstanding maximum permanent ambient temperatures of 500°C and 700°C in peak (less than 90 minutes).
  ‍‍

• Flow sensors for non-corrosive liquid-circulating piping. Technology with paddlewheel, valve and reed bulb or movable piston.
  ‍‍

• Pressure switches for detecting minimum water pressure on water heaters, boilers, spa heaters, Jacuzzis and swimming pools. Three-phase version available and low-profile version that can be incorporated into an electronic card.
  ‍‍

• Pneumatic switches designed to be incorporated into an electronic card that controls a circulation pump for spas and swimming pools, counter-current swimming pumps, and air turbine motors in balneotherapy.
  ‍‍

• Additional accessories such as: silicone caps, speed controllers for mixers, temperature controller with immersion probe, glove fingers, mounting systems, etc.

‍

These products can be customised to meet your needs and application.

Please do not hesitate to contact us with your requirements. We will be happy to study them and give you the best advice.