APPLICATION AREAS

Renewable energy

The share of renewable energy in Europe's energy consumption is booming, driven by European environmental policies.

‍

Our efforts and investments over the past few years have allowed us to offer high-reliability products, allowing us to be referenced as a tier-one supplier by major heat pump manufacturers.

We are continuing our developments to complete our ranges.

‍

These ranges include:

‍

  • ‍Flow through heaters also knows as booster heaters or backup heaters for Heat Pump
    ‍    Applied to heat pumps, we design and manufacture optimized heaters according to different parameters. Standard "platform-type" products, they can be customised according to your specifications to achieve the best energy efficiency:
    o  Diameter, length, surface power, insulation, pre-wiring
    o  Temperature control and safety against abnormal overheating.
    o  Flow detection option
    o  Fixing accessories, feet...

These products are designed with durability in mind. They are resistant to water hammer and the risk of leaks caused by micro-defects in the welds thanks to a TIG welding process. They are available in 304L stainless steel (316L optional), heating element body in 316L (Incoloy 800 optional).
‍‍

  • ‍Combistats and electromechanical safety, single or three-phase, up to 30A/400VA T125.
    ‍‍‍
  • ‍Immersion heaters on flanges or screws for domestic storage tanks, powered in single or three-phase, allowing to manage the top-up or complete heating of the tank. They can be customised in different materials and protective housings.
    ‍‍
  • Immersion heaters in 12 and 24VDC power. In direct use of the low-voltage electricity produced by wind turbines or photovoltaic solar panels for the heating of liquids, hot water circuits, hot water tanks, and reservoirs. Versions available with or without auxiliary 230V elements.

‍

  • ‍Silicone and flexible heating elements, in indirect heating application that can be applied against a wall.
    ‍‍
  • ‍Thermostat modulating combustion, for solid fuel appliances (wood or pellets).

 

These products can be customised to meet your needs and application.

We can pre-assemble them in or a subassembly combining temperature regulation and safety device in single or three-phase.

‍

Please do not hesitate to contact us with your requirements. We will be happy to study them and give you the best advice.

Type 3ST3 - Immersion heater with 78mm × 66mm × 50mm aluminum enclosure. 1"1/4, 1"1/2, M45x2 fittings.

Type 3ST3 - Immersion heater with 78mm × 66mm × 50mm aluminum enclosure. 1"1/4, 1"1/2, M45x2 fittings.

See Product
Type 2H15 - High rating precision switch for controls. Up to 25A 250V and 16A 400V (-60°C~+85°C)

Type 2H15 - High rating precision switch for controls. Up to 25A 250V and 16A 400V (-60°C~+85°C)

See Product
Type 6YTPP - Heat tracing pipe mounting feet for connection boxes, includes gasket for flat self-regulating cables up to 6 x13mm, and for temperature sensor

Type 6YTPP - Heat tracing pipe mounting feet for connection boxes, includes gasket for flat self-regulating cables up to 6 x13mm, and for temperature sensor

See Product
Type 6YTPT, 6YTQT - Stainless steel mounting feet for connection boxes, snapped-on or screwed. Mounting on pipes by nylon ties or metal clamps.

Type 6YTPT, 6YTQT - Stainless steel mounting feet for connection boxes, snapped-on or screwed. Mounting on pipes by nylon ties or metal clamps.

See Product
Type ZD - Vacuum pressure switches - Low voltage circuit vacuum pressure switch

Type ZD - Vacuum pressure switches - Low voltage circuit vacuum pressure switch

See Product
Type ZC - Differential pressure switches - Low voltage circuit, IP65 waterproof differential pressure switch, various center threads.

Type ZC - Differential pressure switches - Low voltage circuit, IP65 waterproof differential pressure switch, various center threads.

See Product
Type ZA - Positive pressure switches - Low voltage circuit adjustable positive pressure switch

Type ZA - Positive pressure switches - Low voltage circuit adjustable positive pressure switch

See Product
Type ZT - Snap action, double poles air switch, center ¼” thread mounting, or surface mounting

Type ZT - Snap action, double poles air switch, center ¼” thread mounting, or surface mounting

See Product
Type ZQ - Positive pressure switche- Single pole snap action contact. Not adjustable set point. SPDT contact.

Type ZQ - Positive pressure switche- Single pole snap action contact. Not adjustable set point. SPDT contact.

See Product
Type MA - Adjustable set point positive pressure switches, Snap action contact pressure switches, field adjustable, for incorporation, SPDT contact

Type MA - Adjustable set point positive pressure switches, Snap action contact pressure switches, field adjustable, for incorporation, SPDT contact

See Product
Type MB - Adjustable set point positive pressure switches, Snap action contact pressure switches, field adjustable,SPDT contact, optional IP65 enclosure

Type MB - Adjustable set point positive pressure switches, Snap action contact pressure switches, field adjustable,SPDT contact, optional IP65 enclosure

See Product
Type ZK - Snap action contact air switch, single pole, momentary or latching action New high sensivity types

Type ZK - Snap action contact air switch, single pole, momentary or latching action New high sensivity types

See Product
Type BK - Very high temperature steatite connection blocks. Indirect pressure clamping, with pressure plate, 750V range

Type BK - Very high temperature steatite connection blocks. Indirect pressure clamping, with pressure plate, 750V range

See Product
Type BJ - Steatite connection blocks 450V range

Type BJ - Steatite connection blocks 450V range

See Product
Type BH - Ceramic insulators for heating elements, 400V range

Type BH - Ceramic insulators for heating elements, 400V range

See Product
Type BM - Ceramic terminal blocks for 3 phase asynchronous electrical motors 450V range (BM154,BM185,BM205,BM235,BM256,BM286,BM358)

Type BM - Ceramic terminal blocks for 3 phase asynchronous electrical motors 450V range (BM154,BM185,BM205,BM235,BM256,BM286,BM358)

See Product
Type 5MA3-F - Wired thermal fuses, for insertion into 8.5mm I.D. pocket (thermowells)

Type 5MA3-F - Wired thermal fuses, for insertion into 8.5mm I.D. pocket (thermowells)

See Product
Waterproof wall feed-through for adjustment shafts

Waterproof wall feed-through for adjustment shafts

See Product
Pocket tubes, Pocket grommets, flanges and fittings

Pocket tubes, Pocket grommets, flanges and fittings

See Product
Type Y8WR-Z - Electronic thermostat, NTC sensor, for heat trace pipe temperature control, vertical foot mounting on pipe

Type Y8WR-Z - Electronic thermostat, NTC sensor, for heat trace pipe temperature control, vertical foot mounting on pipe

See Product
Type Y8WR-X, Y8WR-Y - Electronic thermostat, NTC sensor, for heat trace pipe temperature control, remote wall mounting

Type Y8WR-X, Y8WR-Y - Electronic thermostat, NTC sensor, for heat trace pipe temperature control, remote wall mounting

See Product
Type Y8WJ-Z - Electronic Temp. controller, double digital display, multi-sensors, PID or ON-OFF action, heat trace pipe temperature control, vertical foot mounting on pipe

Type Y8WJ-Z - Electronic Temp. controller, double digital display, multi-sensors, PID or ON-OFF action, heat trace pipe temperature control, vertical foot mounting on pipe

See Product
Type Y8WJ-X, Y8WJ-Y - Electronic T° controller with double digital display, multi-sensors, PID or ON-OFF action, heat trace pipe temperature control, remote wall mounting

Type Y8WJ-X, Y8WJ-Y - Electronic T° controller with double digital display, multi-sensors, PID or ON-OFF action, heat trace pipe temperature control, remote wall mounting

See Product
Type Y8WH-Z - Electronic temperature controller with digital display, NTC sensor, for heat trace pipe temperature control, vertical foot mounting on pipe

Type Y8WH-Z - Electronic temperature controller with digital display, NTC sensor, for heat trace pipe temperature control, vertical foot mounting on pipe

See Product
Type Y8WH-X, Y8WH-Y - Electronic temperature controller with digital display, NTC sensor, for heat trace pipe temperature control, remote wall mounting

Type Y8WH-X, Y8WH-Y - Electronic temperature controller with digital display, NTC sensor, for heat trace pipe temperature control, remote wall mounting

See Product
Type Y1A2P, Y1B2P - Electronic room thermostats for heat tracing, metal box

Type Y1A2P, Y1B2P - Electronic room thermostats for heat tracing, metal box

See Product
Type Y0D8, Y0D9 - “Pigtail” bulb room thermostat, with built-in pilot light and 2 M20 cable glands for heat tracing application

Type Y0D8, Y0D9 - “Pigtail” bulb room thermostat, with built-in pilot light and 2 M20 cable glands for heat tracing application

See Product
Type YF62NC - Electronic room thermostats for heat tracing

Type YF62NC - Electronic room thermostats for heat tracing

See Product
Type YF7GNC - “Pigtail” bulb room thermostats for heat tracing

Type YF7GNC - “Pigtail” bulb room thermostats for heat tracing

See Product
Type Y381 - Temperature sensor, thermostat or level sensor enclosure

Type Y381 - Temperature sensor, thermostat or level sensor enclosure

See Product
TYpe Y3A4 - Miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

TYpe Y3A4 - Miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

See Product
Type Y3A3 - Miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

Type Y3A3 - Miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

See Product
Type Y3A2 - Sub-miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

Type Y3A2 - Sub-miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

See Product
Type Y3A1 - Sub-miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

Type Y3A1 - Sub-miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

See Product
Type Y307 - Big size enclosure for immersion heater, temperature sensor, level sensor or controls

Type Y307 - Big size enclosure for immersion heater, temperature sensor, level sensor or controls

See Product
Type Y306- Round enclosure for immersion heater or temperature sensor

Type Y306- Round enclosure for immersion heater or temperature sensor

See Product
Type Y305 - Enclosure for immersion heater

Type Y305 - Enclosure for immersion heater

See Product
Type Y304 - Enclosure for immersion heater, level sensor or temperature sensor

Type Y304 - Enclosure for immersion heater, level sensor or temperature sensor

See Product
Tye Y303 - Miniature enclosure for immersion heater, level sensor or temperature sensor

Tye Y303 - Miniature enclosure for immersion heater, level sensor or temperature sensor

See Product
Type Y3S7 - Big size enclosure for immersion heater or temperature sensor

Type Y3S7 - Big size enclosure for immersion heater or temperature sensor

See Product
Type Y3S5 - Medium size enclosure for immersion heater or temperature sensor

Type Y3S5 - Medium size enclosure for immersion heater or temperature sensor

See Product
Type Y3C6 - Polypropylene immersion heater enclosure for surface treatment baths and highly corrosive environments

Type Y3C6 - Polypropylene immersion heater enclosure for surface treatment baths and highly corrosive environments

See Product
Type DT4 - Horizontal mounting, reed switch contact, PBT stem, hollow PBT float, 6.35 × 0.8 QC terminals, ½"BSPP thread

Type DT4 - Horizontal mounting, reed switch contact, PBT stem, hollow PBT float, 6.35 × 0.8 QC terminals, ½"BSPP thread

See Product
Type DT3 - Horizontal mounting, reed switch contact, PBT stem, hollow PBT float, Cable output, ½”BSPP thread

Type DT3 - Horizontal mounting, reed switch contact, PBT stem, hollow PBT float, Cable output, ½”BSPP thread

See Product
Type DT1 - Horizontal mounting, reed switch contact, PBT stem, hollow PBT float, Cable output, ½" NPT thread

Type DT1 - Horizontal mounting, reed switch contact, PBT stem, hollow PBT float, Cable output, ½" NPT thread

See Product
Type DM6- Vertical mounting, reed switch contact, polypropylene stem with side mounting bracket, dia. 29 × 16.4mm EPS foam float,

Type DM6- Vertical mounting, reed switch contact, polypropylene stem with side mounting bracket, dia. 29 × 16.4mm EPS foam float,

See Product
Type DM5 - Vertical mounting, reed switch contact, polypropylene stem, dia. 20 × 16.4mm EPS foam float, cable output, side mounting bracket

Type DM5 - Vertical mounting, reed switch contact, polypropylene stem, dia. 20 × 16.4mm EPS foam float, cable output, side mounting bracket

See Product
Type DM1 - Reed switch contact, stem with M8 thread, cable output, dia. 25 × 15mm polypropylene float

Type DM1 - Reed switch contact, stem with M8 thread, cable output, dia. 25 × 15mm polypropylene float

See Product
Type 9STQ - Immersion heaters 182×130×132mm plastic enclosure. Fittings 1"1/4, 1"1/2, M45x2. Electronic PID, with or without manual reset thermostat.

Type 9STQ - Immersion heaters 182×130×132mm plastic enclosure. Fittings 1"1/4, 1"1/2, M45x2. Electronic PID, with or without manual reset thermostat.

See Product
Type Y261 - 3 parallel ways connection box for heat tracing cables, with built-in antifreeze thermostat

Type Y261 - 3 parallel ways connection box for heat tracing cables, with built-in antifreeze thermostat

See Product
Type Y260 - 3 parallel ways connection box for heat tracing cables, without thermostat

Type Y260 - 3 parallel ways connection box for heat tracing cables, without thermostat

See Product
Type Y29C, Y29D - Connection box, pipe mounting leg, for two traditional or self-regulating cables, one power supply cable and temperature sensor cable

Type Y29C, Y29D - Connection box, pipe mounting leg, for two traditional or self-regulating cables, one power supply cable and temperature sensor cable

See Product
Type Y28 - 4 cross ways connection box for heat tracing cables, without thermostat, for traditional or self-regulating cables

Type Y28 - 4 cross ways connection box for heat tracing cables, without thermostat, for traditional or self-regulating cables

See Product
Type 9T10 - Cartridge heaters dia. 10mm, with built-in thermostat, M14 × 1.5 thread

Type 9T10 - Cartridge heaters dia. 10mm, with built-in thermostat, M14 × 1.5 thread

See Product
Type 9STJ - Full stainless steel immersion heater, without brazing, 105×105×100mm stainless steel enclosure. Stainless steel 1"1/2 fitting.

Type 9STJ - Full stainless steel immersion heater, without brazing, 105×105×100mm stainless steel enclosure. Stainless steel 1"1/2 fitting.

See Product
Type 9STB - Immersion heaters 182×130×120mm plastic enclosure. Fittings 1"1/2, M45x2. With mechanical or electronic temperature control.

Type 9STB - Immersion heaters 182×130×120mm plastic enclosure. Fittings 1"1/2, M45x2. With mechanical or electronic temperature control.

See Product
Type 9ST5 - Standard immersion heater with aluminum enclosure, 105 × 105 × 96mm, with and without thermostat

Type 9ST5 - Standard immersion heater with aluminum enclosure, 105 × 105 × 96mm, with and without thermostat

See Product
Type 9ST4 - Immersion heater with 78mm × 78mm × 74mm aluminum enclosure. 1"1/4, 1"1/2, M45x2 fittings. With or without thermostat.

Type 9ST4 - Immersion heater with 78mm × 78mm × 74mm aluminum enclosure. 1"1/4, 1"1/2, M45x2 fittings. With or without thermostat.

See Product
Type 9ST2 - Immersion heater with round enclosure, dia. 58 × 75mm. 1"1/4, 1"1/2, M45x2 fittings.

Type 9ST2 - Immersion heater with round enclosure, dia. 58 × 75mm. 1"1/4, 1"1/2, M45x2 fittings.

See Product
Type 9SFN202, 9SFN502 - Renewable energy 1"1/2 and M45x2 immersion heaters, 12 and 24V power supply with 230V auxiliary heating element, with connection box

Type 9SFN202, 9SFN502 - Renewable energy 1"1/2 and M45x2 immersion heaters, 12 and 24V power supply with 230V auxiliary heating element, with connection box

See Product
Type 9SFN200, 9SFN500 - Renewable energy 1"1/2 and M45x2 immersion heaters, 12 and 24V power supply with 230V auxiliary heating element

Type 9SFN200, 9SFN500 - Renewable energy 1"1/2 and M45x2 immersion heaters, 12 and 24V power supply with 230V auxiliary heating element

See Product
Type 9RSU3 - Full stainess steel immersion heaters with 3 hairpin heating elements, TIG welded stainless steel fitting, cylindrical thread 1”1/2 BSPP; M45x2

Type 9RSU3 - Full stainess steel immersion heaters with 3 hairpin heating elements, TIG welded stainless steel fitting, cylindrical thread 1”1/2 BSPP; M45x2

See Product
Type 9RBU3 - Immersion heaters with 3 hairpin heating elements, brazed brass fitting, with cylindrical thread 1”1/4 BSPP; 1”1/2 BSPP; M45x2

Type 9RBU3 - Immersion heaters with 3 hairpin heating elements, brazed brass fitting, with cylindrical thread 1”1/4 BSPP; 1”1/2 BSPP; M45x2

See Product
Type 4YC - Miniature temperature limiters, dedicated to heat pump application using R290 (Propane). Calibration up to 90°C

Type 4YC - Miniature temperature limiters, dedicated to heat pump application using R290 (Propane). Calibration up to 90°C

See Product
Type 9SU113 - Standard liquids heaters 70mm diameter, length 130mm, 1" fittings

Type 9SU113 - Standard liquids heaters 70mm diameter, length 130mm, 1" fittings

See Product
Type 9SU107 - Standard liquids heaters 70mm diameter, length 70mm, 1" fittings

Type 9SU107 - Standard liquids heaters 70mm diameter, length 70mm, 1" fittings

See Product
Type 4VA, VB - Miniature temperature limiters, not current sensing, calibration up to 100°C (212°F), cable or wires connection

Type 4VA, VB - Miniature temperature limiters, not current sensing, calibration up to 100°C (212°F), cable or wires connection

See Product
Type R20 - Flap flow switches, reed switch contact, ½" BSPP male thread

Type R20 - Flap flow switches, reed switch contact, ½" BSPP male thread

See Product
Type R35 - Piston flow switches, reed switch contact, inlet and outlet ½" BSPP male,

Type R35 - Piston flow switches, reed switch contact, inlet and outlet ½" BSPP male,

See Product
Type R15 - All stainless steel paddle flow switch, 16A snap action switch, ¾" male thread

Type R15 - All stainless steel paddle flow switch, 16A snap action switch, ¾" male thread

See Product
Type R1V - Paddle flow switches, reed switch contact, external brass body

Type R1V - Paddle flow switches, reed switch contact, external brass body

See Product
Type R1Z2 - Paddle flow switches, reed switch contact, low voltage simplified model.

Type R1Z2 - Paddle flow switches, reed switch contact, low voltage simplified model.

See Product
Types R1S, R1F - Paddle flow switches, reed switch contact, ½" male thread, long paddle.

Types R1S, R1F - Paddle flow switches, reed switch contact, ½" male thread, long paddle.

See Product
Type Y22 - 2 parallel ways connection box for heat tracing cables, with 2 pilot lights and built-in antifreeze thermostat

Type Y22 - 2 parallel ways connection box for heat tracing cables, with 2 pilot lights and built-in antifreeze thermostat

See Product
Type 49C - Thermostats overmolded on heat tracing cables supplied by customer

Type 49C - Thermostats overmolded on heat tracing cables supplied by customer

See Product
Type R1X - Paddle flow switches, reed switch contact, external body.

Type R1X - Paddle flow switches, reed switch contact, external body.

See Product
Type R1R - Paddle flow switches, micro-switch contact, ½" BSPP male thread, and Pt100 temperature sensor

Type R1R - Paddle flow switches, micro-switch contact, ½" BSPP male thread, and Pt100 temperature sensor

See Product
Type R1P - Paddle flow switches, reed switch contact, ¾"union nut, slim design

Type R1P - Paddle flow switches, reed switch contact, ¾"union nut, slim design

See Product
Type R1D - Paddle flow switches, micro-switch contact, ½" BSPP male thread

Type R1D - Paddle flow switches, micro-switch contact, ½" BSPP male thread

See Product
Type R1B - Paddle flow switches, micro-switch contact, ¾" BSPP union nut

Type R1B - Paddle flow switches, micro-switch contact, ¾" BSPP union nut

See Product
Type YF5GPP - Adjustable set point rod thermostat designed for highly basic or acid corrosive liquids or environments.

Type YF5GPP - Adjustable set point rod thermostat designed for highly basic or acid corrosive liquids or environments.

See Product
Type Y2U - Thermostat with external knob adjustment, IP65, with two pilot lights, for industrial jacket and blanket heaters.

Type Y2U - Thermostat with external knob adjustment, IP65, with two pilot lights, for industrial jacket and blanket heaters.

See Product
Type Y2T2, Y2T3 - Electronic thermostats, remote sensor, IP69K enclosure in PA66 and PC

Type Y2T2, Y2T3 - Electronic thermostats, remote sensor, IP69K enclosure in PA66 and PC

See Product
Type Y2D, Y2M - Bulb and capillary thermostats,with 2 built-in pilot lights

Type Y2D, Y2M - Bulb and capillary thermostats,with 2 built-in pilot lights

See Product
Type Y09 - Combination of adjustable set point thermostat and manual reset high limit, IP54 commercial housing, capillary output, wall mounting

Type Y09 - Combination of adjustable set point thermostat and manual reset high limit, IP54 commercial housing, capillary output, wall mounting

See Product
Type Y048, Y049 - Rod thermostats

Type Y048, Y049 - Rod thermostats

See Product
Type Y038,Y039 - Bulb and capillary thermostats

Type Y038,Y039 - Bulb and capillary thermostats

See Product
Type Y035,036 - Pigtail bulb room thermostats

Type Y035,036 - Pigtail bulb room thermostats

See Product
Type Y0A8, Y0A9 - Bulb and capillary thermostats, with built-in pilot light and 2 or 3 M20 cable glands

Type Y0A8, Y0A9 - Bulb and capillary thermostats, with built-in pilot light and 2 or 3 M20 cable glands

See Product
Type 2DPAP6F - Digital display electronic controller, ON-OFF action, IP69K and IK10 enclosure, wall mounting

Type 2DPAP6F - Digital display electronic controller, ON-OFF action, IP69K and IK10 enclosure, wall mounting

See Product
Type Y8 - Distribution boxes, ground fault relay boxes, junction or distribution box with cage terminal block

Type Y8 - Distribution boxes, ground fault relay boxes, junction or distribution box with cage terminal block

See Product
Type Y6, Y7, Y8 - Temperature control boxes Electronic thermostat types

Type Y6, Y7, Y8 - Temperature control boxes Electronic thermostat types

See Product
Type 82 - 3 poles manual reset high limit, fail safe

Type 82 - 3 poles manual reset high limit, fail safe

See Product
Type 8G - Single pole control thermostat, bulb and capillary

Type 8G - Single pole control thermostat, bulb and capillary

See Product
Type 8C - 3 × 16A control thermostat.

Type 8C - 3 × 16A control thermostat.

See Product
Type 4REMR - Epoxy potted waterproof manual reset disc thermostat, 2 wire output.

Type 4REMR - Epoxy potted waterproof manual reset disc thermostat, 2 wire output.

See Product
Type 4C - 3 poles manual reset disc thermostat.

Type 4C - 3 poles manual reset disc thermostat.

See Product
Type 2PE2P6 - Electronic thermostat, 16A, knob adjustment, remote sensor, Pt100 temperature sensor.

Type 2PE2P6 - Electronic thermostat, 16A, knob adjustment, remote sensor, Pt100 temperature sensor.

See Product
Type 2PE2N6 - Electronic thermostat, 16A, knob adjustment, remote sensor, NTC temperature sensor.

Type 2PE2N6 - Electronic thermostat, 16A, knob adjustment, remote sensor, NTC temperature sensor.

See Product
Type 85 - 3 poles manual reset thermal cut-out, fail safe (up to 500°C) 30A 250/400VAC

Type 85 - 3 poles manual reset thermal cut-out, fail safe (up to 500°C) 30A 250/400VAC

See Product

Application domain's products

Find our products

We produce over 6 million components per year and manage over 10,000 codes
for finished products. View and download our catalogs to stay up-to-date!

See cataloguesSee Products